|
Epoxy System
Professional Epoxy Coating
Glue wooden parts together and then make a virtually maintenance free surface by epoxy coating it. This epoxy is used for gluing the wood, laminates and fillets as well as for coating wooden parts. We recommend the use of this solvent free epoxy for use at home.
It has a slow initial cure time that makes it ideal for unpractised workers. It does not rely on solvents for treating the surface or softening for further coats thus it is perfect for those whose workplace is within smelling distance of a living area. There is no need to use respirators or have an air extractor system.
· Any accidental splashes on the skin can be cleaned with soap and water.
· This epoxy has virtually no smell.
· This epoxy must be applied at a temperature greater than 10º C to ensure a proper cure. At the other extreme it is possible to pre-heat the epoxy to 28ºC. to improve the penetration into the wood.
· The pot life of 0.5kg mass at 25ºC. is approximately 40 minutes
· Tack free cure time at 25ºC is between 4 and 5 hours
· Maximum time between coats without sanding is 12 hours
· Tensile strength 8,800 psi
· Tensile modulus 390,000 psi
· Tensile elongation 7.2%
· Flexural Strength 14,900 psi
· Flexural Modulus 441,000 psi
· Compressive Strength 12,300 psi
We no-longer sell mixing pots because most customers now seem to use old, cleaned out, yogurt pots or similar.
Click on 'Working With Epoxy' for more information on how to use this system. Or Click Here .
These products cannot be sent beyond the UK
For more information click either the thumbnail or product name:
Back to Top
|
